Monel k-500 Forgings, Forged Rings, Rolled Rings

Monel k-500 Forgings, Forged Rings, Rolled Rings



Write A Review | Questions & Answers

Monel k-500 Forgings are precipitation hardening components manufactured from copper nickel alloy with addition of titanium and aluminium. Monel k-500 Forgings have high tensile strength with better corrosion resistance. TorqBolt is an eminent Monel K-500 forged ring supplier in India.

ASTM F468, B564, B164 Alloy k-500 | ASTM F467, B564, B164 Alloy k-500

ASME SF468 / SB564, B164 Alloy k-500 | ASME SF468 / SB564, B164 Alloy k-500

DIN 17743 | B564 DIN 17743

– Finish: Pickling and Passivation

– Compatible Fasteners: Monel K-500 Screws | Monel K-500 Nuts

– Marking: TorqBolt N05500

– Type: Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling


Product Features

DimensionsAs per clients requirements
Melt OriginEast Europe/South America/Korea/Japan
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

Monel k-500 Forgings Specification

Monel Alloy K-500 is a precipitation- hardened Nickel-copper alloy that merges the corrosion resistance of Monel alloy 400 with higher strength and hardness. It possesses low permeability and is non-magnetic at temperatures as low as -150 degrees F (-101 Degrees C). Widely used for various industry applications such as pump shafts, oil-well tools and instruments, doctor blades and scrappers, spring valve trim, forgings and marine propeller shafts etc.

Monel K-500 Properties

Chemical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.


TorqBolt is a well known stockist of Pitch Dia Monel k-500 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Monel is a registered trademark of Special Metals Corporation.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.