Werkstoff 2.0882 Fasteners, Cupronickel 70/30, Hex Bolt, Nut, Stud, Screw, Washer, DIN 931, 933, 934, 7991, 976, Inch, Metric Threads

Werkstoff 2.0882 Fasteners, Cupronickel 70/30, Hex Bolt, Nut, Stud, Screw, Washer, DIN 931, 933, 934, 7991, 976, Inch, Metric Threads

£0.47

£0.47-£1350

Write A Review | Questions & Answers

2.0882 Fasteners like Bolts, Nuts, Washers and Threaded Rods are classified under CopperNickel. Werkstoff 2.0882 Fasteners are internationally known as fasteners manufactured from Cupronickel 70/30.

– Finish: Pickling and Passivation

– Compatible Fasteners: Cupronickel 70/30 Washers | Cupronickel 70/30 Nuts

– Marking: TorqBolt 2.0882

– Type: Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling

000

Product Features

DimensionsDIN 931, 933, 934, 7991, 976
ThreadsUnless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically at the option of TorqBolt
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Melt OriginEast Europe/South America/Korea/Japan
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

2.0882 Fasteners Specification

Copper Nickel 70-30 is a high content resistant to corrosion at elevated high temperatures due to presence of nickel oxide at high temperature. Alloy 70-30 is extremely used in offshore industries.

Cupronickel 70/30 Properties

Chemical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

ADDITIONAL INFORMATION

TorqBolt is a well known stockist of Pitch Dia Cupronickel 70/30 Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

Cuprothal is a registered trademark of Kanthal, a Sandvik Materials Technology Company.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.