Blog
BS DIN EN 1.4016 stainless Steel Bolts | UNS S43000
  • Bolting Specifications
  • Fasteners
  • Bolts
  • Werkstoff 1.4016 Stainless Steel Bolts

    • Werkstoff 1.4016 Stainless Steel Bolts

    430S17, BS2320, 1.4016, 430, S43000, X6CR17

    1.4016 Fasteners like Bolts are classified under Stainless Steel. Werkstoff 1.4016 Fasteners are internationally known as fasteners manufactured from 430 Stainless Steel.

    Related Products

    430 SS Bolts 430 Stainless Fasteners Type 430 Stainless Forgings 430 Stainless Nuts 430 Stainless Steel Machine Screws Type 430 Stainless Steel Threaded Rod 430 Stainless Washers 1.4016 Washers

    Werkstoff 1.4016 Stainless Steel Bolts Properties

    Werkstoff 1.4016 Stainless Steel Bolts Common Designations for cold heading

    Type Of Steel/Alloy Grade Steel Number Steel Designation UNS Trade Name
    Ferritic F1 1.4016 X6Cr17 S43000 430

    Werkstoff 1.4016 Stainless Steel Bolts Chemical Requirements

    Stainless steel grade Chemical composition a (cast analysis, mass fractionin %) b Other elements and notes
    C Si Mn P S Cr Mo Ni Cu N
    Ferritic F1 0,08 1,00 1,00 0,040 0,030 15,0 to 18,0 _ f 1,00 - - j

    Werkstoff 1.4016 Stainless Steel Bolts Mechanical Requirements

    Mechanical properties (Martensitic and Ferritic Steel)

    Stainless steel grade Property class Tensile strength a Rmf min. MPa Stress at 0,2 % non-proportional elongation b Rpf mm. MPa Elongation after fracture A min. mm
    Ferritic F1d 45 450 250 0,2d 135 to 220 - 128 to 209
    60 600 410 0,2d 180 to 285 - 171 to 271

    Applicability of tests for fasteners with full loadability

    Stainless steel grade Property and related test method
    Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum breaking torque M B Hardness
    Tensile test 9.1 Wedge tensile test 9.4 Tensile test 9.1 Tensile test 9.1 Torsional test 9.5 Hardness test 9.6
    F1 d ≥ 3 mm I ≥ 2,Sd b ≥ 2d Not relevant d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d No value available Applicable

    Applicability of tests for fasteners with reduced loadability

    Stainless steel grade Property and related test method
    Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum tensile load Fmr Hardness
    Tensile test 9.1, 9.3 Tensile test 9.1 Tensile test 9.1 Tensile test 9.2 Hardness test 9.6
    F1 d ≥ 3 mm for all lengths, when b ≥ 3d a d ≥ 3 mm for all lengths Applicable

    Related Keywords

  • Werkstoff 1.4016 Stud Bolts
  • Werkstoff 1.4016 Bolt
  • En 1.4016 Bolting
  • Din 1.4016 Screws
  • Bs 1.4016 Fasteners
  • Wr No.1.4016 Bolt
  • 1.4016 Nuts
  • Werkstoff 1.4016 Screws
  • Werkstoff 1.4016 Threaded Rod
  • Bs 1.4016 Screws
  • Bs 1.4016 Bolting
  • Din 1.4016 Bolt
  • Din 1.4016 Threaded Rod
  • En 1.4016 Fasteners
  • Wr No.1.4016 Nuts
  • Wr No.1.4016 Fasteners
  • 1.4016 Fasteners
  • En 1.4016 Washers
  • Wr No.1.4016 Bolting
  • Bs 1.4016 Bolt
  • 1.4016 Stud Bolts
  • Bs 1.4016 Washers
  • Bs 1.4016 Bolts
  • Din 1.4016 Studs
  • Din 1.4016 Bolting
  • 1.4016 Studs
  • Type 430 Stainless Steel Bolts
  • 430 Stainless Steel Bolt
  • 430 Stainless Bolts
  • Ss 430 Hex Bolt
  • Ss 430 Bolts
  • Ss 430 Machine Bolt
  • 430 Ss Bolting
  • 430 Stainless Metric Bolts
  • Type 430 Stainless Machine Bolt
  • Type 430 Stainless Hex Bolt
  • Ss 430 Bolting
  • 430 Stainless Hex Bolt
  • Type 430 Stainless Bolts
  • Type 430 Stainless Steel Shoulder Bolt
  • Type 430 Stainless Steel Hex Bolt
  • 430 Stainless Steel Machine Bolt
  • 430 Stainless Steel Bolting
  • 430 Ss Machine Bolt
  • 430 Ss Metric Bolts
  • 430 Stainless Machine Bolt
  • Ss 430 Bolt
  • 430 Stainless Steel Hex Bolt
  • Type 430 Stainless Steel Machine Bolt
  • 430 Ss Shoulder Bolt
  • 430 Ss Bolts
  • 430 Stainless Steel Shoulder Bolt
  • Type 430 Stainless Steel Metric Bolts