420 Stainless Steel Forgings | ISO 3506-1 UNS S42000 Specifications

420 Stainless Steel Forgings

420S37, BS2303, 1.4021, 420J1, S42000, X20CR13

420 Stainless Steel Forgings are martensitic stainless steel components manufactured from alloy containing chromium and nickel. Stainless Steel 420 Forgings are used for corrosive environments. TorqBolt is an eminent 420 stainless steel forged ring supplier in India.

Related Products

Type 420 Stainless Steel Bolts Type 420 Stainless Fasteners 420 SS Forgings Type 420 Stainless Nuts Type 420 Stainless Screws Type 420 Stainless Steel Threaded Rod 420 Stainless Steel Flat Washers 1.4021 Fasteners

420 Stainless Steel Forgings Properties

420 Stainless Steel Forgings Common Designations for cold heading

Type Of Steel/Alloy Grade Steel Number Steel Designation UNS Trade Name
General purpose martensitic C1 1.4021 X20Cr13 S42000 420

420 Stainless Steel Forgings Chemical Requirements

Stainless steel grade Chemical composition a (cast analysis, mass fractionin %) b Other elements and notes
C Si Mn P S Cr Mo Ni Cu N
Martensitic C1 0,09 to 0,15 1,00 1,00 0,050 0,030 11,5 to 14,0 - 1,00 - - i

420 Stainless Steel Forgings Mechanical Requirements

Mechanical properties (Martensitic and Ferritic Steel)

Stainless steel grade Property class Tensile strength a Rmr min. MPa Stress at 0,2 % non-proportional elongation b Rpr mm. MPa Elongation after fracture A min. mm Hardness min. to max.
HV HRC HBW
Martensitic C1 50 500 250 0,2d 155 to 220 - 147 to 209
70 700 410 0,2d 220 to 330 20 to 34 209 to 314
110 c 1100 820 0,2d 350 to 440 36 to 45 -

Applicability of tests for fasteners with full loadability

Stainless steel grade Property and related test method
Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum breaking torque M B Hardness
Tensile test 9.1 Wedge tensile test 9.4 Tensile test 9.1 Tensile test 9.1 Torsional test 9.5 Hardness test 9.6
C1 d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d d ≥ 3 mm I ≥ 2,Sd b ≥ 2d No value available Applicable

Applicability of tests for fasteners with reduced loadability

Stainless steel grade Property and related test method
Minimum tensile strength Rmr Stress at 0,2 % non-proportional elongation Rpf Elongation after fracture A Minimum tensile load Fmr Hardness
Tensile test 9.1, 9.3 Tensile test 9.1 Tensile test 9.1 Tensile test 9.2 Hardness test 9.6
C1 C3 C4 d ≥ 3 mm for all lengths, when b ≥ 3d a d ≥ 3 mm for all lengths Applicable

Related Keywords

  • 420 Stainless Steel Forged Bars
  • Type 420 Stainless Steel Forged RingS
  • 420 Stainless Forged Disc
  • Type 420 Stainless Shafts
  • Type 420 Stainless Steel Rings
  • Type 420 Stainless Rings
  • Ss 420 Forged Disc
  • 420 Ss Shafts
  • 420 Ss Forgings
  • 420 Ss Forged RingS
  • Type 420 Stainless Steel Shafts
  • 420 Stainless Steel Forgings
  • 420 Ss Forged Bars
  • 420 Stainless Rings
  • 420 Stainless Forged Bars
  • Ss 420 Forgings
  • 420 Stainless Steel Shafts
  • 420 Stainless Steel Rings
  • 420 Stainless Steel Forged RingS
  • Type 420 Stainless Forged RingS
  • 420 Stainless Forged RingS
  • Type 420 Stainless Forgings
  • Ss 420 Shafts
  • Type 420 Stainless Forged Disc
  • 420 Stainless Shafts
  • Ss 420 Rings
  • Type 420 Stainless Forged Bars
  • 420 Ss Forged Disc
  • 420 Stainless Forgings
  • Type 420 Stainless Steel Forged Disc
  • Type 420 Stainless Steel Forged Bars
  • Type 420 Stainless Steel Forgings
  • 420 Stainless Steel Forged Disc
  • Ss 420 Forged Bars
  • 420 Ss Rings