15 5 PH Fasteners, Hex Bolt, Nut, Stud, Screw, Washer

15 5 PH Fasteners, Hex Bolt, Nut, Stud, Screw, Washer



Write A Review | Questions & Answers

15 5 PH Fasteners are martensitic fasteners manufactured from alloy containing chromium and nickel with addition of copper to achieve precipitation hardening. 15 5 PH Fasteners are used in the oil and gas, nuclear and aerospace industries where a combination of high strength, corrosion resistance and a generally low but acceptable degree of toughness is required. TorqBolt is an eminent 17 4 Ph fastener supplier in India.

ASTM F2281, A564 15-5PH | ASTM F2281, A564 15-5PH

ASME SF2281, SB564 15-5PH | ASME SF2281, SB564 15-5PH

– Finish: Pickling and Passivation

– Compatible Fasteners: 15 5 Ph Washers | 15 5 Ph Nuts

– Marking: TorqBolt S15500

– Type: Cold Forged, Hot Forged, Bar Stock Machined


Product Features

DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
ThreadsUnless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically at the option of TorqBolt
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Melt OriginIndia
Product OriginMade in India
CertificationDual Certified As per ASTM & ASME Codes
Additional CertificationsPED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Additional RequirementsNACE MR0103/MR0175/ISO 15156 Compliance
Mandatory RequirementsFree from Mercury & Radioactive Contamination

15-5 Ph Stainless Steel Fasteners Specification

Alloy 15-5 PH is also known as XM-12 .This alloy has excellent corrosion resistance .

15 5 PH Fasteners Properties

Chemical Heat Treatment

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.


TorqBolt is a well known stockist of Pitch Dia 17 4 PH Stainless Steel Round Bars from ¼ Inch to 4 inch & 6mm to 100mm in 1 meter, 3 meter & 6 Meter lengths. All Threaded Bars are Magnetic Particle Examined in accordance with ASTM E 709 with Indications & Cracks within 3% of The Diameter.

17-4 PH is a registered trademark of AK Steel.

Raw Material Specifications: ASTM A276, A182, A240, A493, B98, B564, B637, B473, and A582 are noted for information only by American Society of Mechanical Engineers and American Society of testing and materials as suitable sources of material for the manufacture of bolts, hex cap screws, studs and washers, springs, forgings and flanges to the respective specification.